BHK02 HYDRAULIC TAPPING MACHINE
The BHK02 model Tapping machine, which is a member of the BHK Series hydraulic tapping machine group, is a model with standard features that works between M5-M24.
Bluetech tapping machines are extremely ergonomic and powerful machines produced to terminate tapping problems. The BHK serial machines with capability of tapping in every diameter ranging between M5 to M24, can be adjusted to the desired torques and cycles, with two-stage gearbox in their possession, and thus they fulfill their tasks in the easiest manner, without any error.
Movable arm mechanism on BHK machines covers a wide area of 2050mm.
can scan, both the parts connected on the T-slotted table and
the machine can approach the other points around it in the most sensitive way. BHK machines' angle adjustable head, according to the position of the workpiece, horizontal, vertical, It can be adjusted at an angle and can be easily fixed at any desired angle.
The Bluetech BHK serial machines can be used not only for tapping , but also for reaming, countersinking and threading operations.With Bluetech tapping machines, you can perform all of these operations perfectly and in the shortest time.
The universal head system in our tapping machines enables horizontal, vertical and angle tapping according to the position of the work piece
Forward and Reverse Speed Control
In our tapping machines, the forward and reverse rotation speeds of the tool are controlled via the electronic system, not the hydraulic system.
Thanks to this system, forward and return speeds can be adjusted easily, precisely and independently from each other, the oil is prevented from heating up , and the rotation speed can be read instantly on the digital counter screen on the machine.
Tool Breakage Safety
Thanks to the torque adjustable and with clucth type tool holders used in our tapping machine, when the tool is jammed on the tapped piece or when the end point is reached in the blind holes, the safe tool holder is activated and prevents the tool from breaking.
MQL Lubrication System
Tapping is a difficult machining process that is very sensitive to friction and heating. Applying the correct lubrication system during operation results in longer tool life, more production, more precise tolerance size, smoother threading and more efficient stock removal.
Patented MQL technology integrated into Bluetech tapping machines is a technique used by adding a very small amount of oil into compressed air that moves very quickly. Lubrication is done with an aerosol consisting of fine oil droplets mixed into the air stream.
This system reduces the use of oil significantly and minimizes environmental impact. It eliminates the need for refrigerant treatment. It creates a high job security and healthy working environment.
M5 - M24
700 x 900
A: 500 | B: 2050 | C: 920 | D: 700
Optionally adjustable cycle setting
24 V operating voltage for operator safety
Pressure / Torque Setting
Optionally adjustable pressure-torque setting
Phase Protection System
Phase protection system preventing the electric motor and the hydraulic pump from operating in the reverse direction.
Tool Breakage Safety
Tool breakage safety with special guide holders
Moving arm mechanism that can extend up to
Quick and easy tool changing
3 Axis Operation
Vertical, horizontal and angular tapping
Ground Steel Table
20 mm grooved table
It easily performs tapping operations in all sizes between M5 to M24.
3 KW - 380 V Electric motor